Field Name	Length (bits)		Bit		Contents	Description
	Item	Total	Algn	Off
scienceReport	384	384	32	0	telemetry Packet	Post-science run report sent at the end of a science or bias run (see table 10, swreq Rev. I)
header	64	64	32	0	telemetry Header	Telemetry Packet Header
synch	32	32	32	0	uint32 = 0x736f4166	This field delimits the start of a telemetry packet.
telemetryLength	10	10	1	32	uint10 = 12	This field indicates the total number of 32-bit words in the telemetry packet
formatTag	6	6	1	42	uint6 = 15	This field identifies the content of the telemetry packet [see enum TlmFormatTag]: TTAG_SCI_REPORT
sequenceNumber	16	16	1	48	uint16	This field is the sequence number of the telemetry packet
runStartTime	32	32	32	64	uint32	Science timestamp counter value at start of science run
parameterBlockId	32	32	32	96	uint32	Parameter Block's Identifier field
windowBlockId	32	32	32	128	uint32	Window List Parameter Block's Identifier field (0xffffffff if none used)
biasStartTime	32	32	32	160	uint32	Science timestamp counter value at start of bias computation
biasParameterId	32	32	32	192	uint32	Parameter Block Identifier from most recent bias computation
exposuresProduced	32	32	32	224	uint32	Number of exposures produced by the CCDs during the run
exposuresSent	32	32	32	256	uint32	Number of exposures telemetered by the run
biasErrorCount	32	32	32	288	uint32	Total number of pixel bias map errors detected during the run
fepErrorCodes[6]	8	48	8	320	uint8	Array of codes, indexed by FEP Id, indicating any errors were detected on the corresponding Fep during the run [see enum fepCmdRetCode and enum FepIoErrors]
ccdErrorFlags	6	6	1	368	uint6	Flag indicating if any errors were detected on DEA board used for CCD I0 during the run
ccdError	1	1	1	368	bit	Flag indicating error encountered with a CCD Controller. 1 indicates a problem, 0 indicates no problem.
deaInterfaceErrorFlag	1	1	1	374	bit	Flag indicating if any errors were detected on the Dea Interface Board during the run
terminationCode	8	8	8	376	uint8	Code indicating the reason for the end of the run (i.e. stop command, radiation monitor, error, etc.) [see enum SmTerminationCode]